inav-configurator/_locales/en/messages.json

{
    "translation_version": {
        "message": "0"
    },

    "options_title": {
        "message": "Application Options"
    },
    "options_receive_app_notifications": {
        "message": "Receive desktop <strong>notification</strong> when application updates"
    },
    "options_improve_configurator": {
        "message": "Send anonymous usage data to the developer team"
    },

    "connect": {
        "message": "Connect"
    },
    "connecting": {
        "message": "Connecting"
    },
    "disconnect": {
        "message": "Disconnect"
    },
    "autoConnect": {
        "message": "Auto-Connect"
    },
    "autoConnectEnabled": {
        "message": "Auto-Connect: Enabled - Configurator automatically tries to connect when new port is detected"
    },
    "autoConnectDisabled": {
        "message": "Auto-Connect: Disabled - User needs to select the correct serial port and click \"Connect\" button on its own"
    },
    "deviceRebooting": {
        "message": "Device - <span style=\"color: red\">Rebooting</span>"
    },
    "deviceReady": {
        "message": "Device - <span style=\"color: green\">Ready</span>"
    },

    "backupFileIncompatible": {
        "message": "Backup file provided was generated for previous version of the configurator and is incompatible with this version of configurator. Sorry"
    },

    "backupFileUnmigratable": {
        "message": "Backup file provided was generated by a previous version of the configurator and is not migratable. Sorry."
    },

    "configMigrationFrom": {
        "message": "Migrating configuration file generated by configurator: $1"
    },
    "configMigratedTo": {
        "message": "Migrated configuration to configurator: $1"
    },
    "configMigrationSuccessful": {
        "message": "Configuration migration complete, migrations applied: $1"
    },

    "tabFirmwareFlasher": {
        "message": "Firmware Flasher"
    },
    "tabLanding": {
        "message": "Welcome"
    },
    "tabHelp": {
        "message": "Documentation & Support"
    },

    "tabSetup": {
        "message": "Setup"
    },
    "tabConfiguration": {
        "message": "Configuration"
    },
    "tabPorts": {
        "message": "Ports"
    },
    "tabPidTuning": {
        "message": "PID Tuning"
    },
    "tabReceiver": {
        "message": "Receiver"
    },
    "tabModeSelection": {
        "message": "Mode Selection"
    },
    "tabServos": {
        "message": "Servos"
    },
    "tabGPS": {
        "message": "GPS"
    },
    "tabMotorTesting": {
        "message": "Motors"
    },
    "tabLedStrip": {
        "message": "LED Strip"
    },
    "tabRawSensorData": {
        "message": "Sensors"
    },
    "tabCLI": {
        "message": "CLI"
    },
    "tabLogging": {
        "message": "Logging"
    },
    "tabDataflash": {
        "message": "Dataflash"
    },
    "tabAdjustments": {
        "message": "Adjustments"
    },
    "tabAuxiliary": {
        "message": "Modes"
    },

    "serialPortOpened": {
        "message": "Serial port <span style=\"color: green\">successfully</span> opened with ID: $1"
    },
    "serialPortOpenFail": {
        "message": "<span style=\"color: red\">Failed</span> to open serial port"
    },
    "serialPortClosedOk": {
        "message": "Serial port <span style=\"color: green\">successfully</span> closed"
    },
    "serialPortClosedFail": {
        "message": "<span style=\"color: red\">Failed</span> to close serial port"
    },

    "noConfigurationReceived": {
        "message": "No configuration received within <span style=\"color: red\">10 seconds</span>, communication <span style=\"color: red\">failed</span>"
    },
    "firmwareVersionNotSupported": {
        "message": "This firmware version is <span style=\"color: red\">not supported</span>. Please upgrade to firmware that supports api version <strong>$1</strong> or higher. Use CLI for backup before flashing.  CLI backup/restore procedure is in the documention."
    },

    "tabSwitchConnectionRequired": {
        "message": "You need to <strong>connect</strong> before you can view any of the tabs."
    },
    "tabSwitchWaitForOperation": {
        "message": "You <span style=\"color: red\">can't</span> do this right now, please wait for current operation to finish ..."
    },

    "tabSwitchUpgradeRequired": {
        "message": "You need to <strong>upgrade</strong> your firmware before you can use the $1 tab."
    },
    "firmwareVersion": {
        "message": "Firmware Version: <strong>$1</strong>"
    },
    "apiVersionReceived": {
        "message": "MultiWii API version <span style=\"color: green\">received</span> - <strong>$1</strong>"
    },
    "uniqueDeviceIdReceived": {
        "message": "Unique device ID <span style=\"color: green\">received</span> - <strong>0x$1</strong>"
    },
    "boardInfoReceived": {
        "message": "Board: <strong>$1</strong>, version: <strong>$2</strong>"
    },
    "buildInfoReceived": {
        "message": "Running firmware released on: <strong>$1</strong>"
    },
    "fcInfoReceived": {
        "message": "Flight controller info, identifier: <strong>$1</strong>, version: <strong>$2</strong>"
    },

    "notifications_app_just_updated_to_version": {
        "message": "Application just updated to version: $1"
    },
    "notifications_click_here_to_start_app": {
        "message": "Click here to start the application"
    },

    "statusbar_port_utilization": {
        "message": "Port utilization:"
    },
    "statusbar_usage_download": {
        "message": "D: $1%"
    },
    "statusbar_usage_upload": {
        "message": "U: $1%"
    },
    "statusbar_packet_error": {
        "message": "Packet error:"
    },
    "statusbar_i2c_error": {
        "message": "I2C error:"
    },
    "statusbar_cycle_time": {
        "message": "Cycle Time:"
    },

    "please_grant_usb_permissions": {
        "message": "Please click on <strong>\"Request Optional Permissions\"</strong> button to grant application <strong style=\"color: red\">required</strong> <strong>USB</strong> access"
    },
    "usb_permissions_granted": {
        "message": "Optional <strong>USB</strong> permissions <strong style=\"color: green\">granted</strong>"
    },

    "eeprom_saved_ok": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "default_optional_permissions_head": {
        "message": "Optional USB Permissions"
    },
    "default_optional_permissions_text": {
        "message": "Due to addition of <strong>Naze32PRO</strong> to the supported hardware family, Configurator <strong style=\"color: red\">requires</strong> USB access to allow firmware flashing via DFU"
    },
    "default_request_optional_permissions": {
        "message": "Request Optional Permissions"
    },
    "defaultWelcomeText": {
        "message": "Welcome to <strong>Cleanflight - Configurator</strong>, a utility designed to simplify updating, configuring and tuning of your flight controller.<br /><br />The application supports all hardware that can run cleanflight (sparky, cc3d, acro naze, naze, afromini, flip32, flip32+, cjmcu, chebuzz f3, stm32f3discovery, naze32pro, etc)<br /><br />The firmware source code can be downloaded from <a href=\"https://github.com/cleanflight/cleanflight\" title=\"www.github.com\" target=\"_blank\">here</a><br />The newest binary firmware image is available <a href=\"https://github.com/cleanflight/cleanflight/releases\" title=\"www.github.com\" target=\"_blank\">here</a><br /><br />Latest <strong>CP210x Drivers</strong> can be downloaded from <a href=\"http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx\" title=\"http://www.silabs.com/\" target=\"_blank\">here</a><br />"
    },
    "defaultContributingHead": {
        "message": "Contributing"
    },
    "defaultContributingText": {
        "message": "If you would like to help make Cleanflight even better you can help in many ways, including:<br /><ul><li>Answering other users questions on the forums and IRC.</li><li>Contributing code to the firmware and configurator - new features, fixes, improvements</li><li>Testing <a href=\"https://github.com/cleanflight/cleanflight/pulls\" target=\"_blank\">new features/fixes</a> and providing feedback.</li><li>Helping out with <a href=\"https://github.com/cleanflight/cleanflight/issues\" target=\"_blank\">issues and commenting on feature requests</a>.</li></ul>"
    },
    "defaultChangelogHead": {
        "message": "Configurator - Changelog"
    },
    "defaultButtonFirmwareFlasher": {
        "message": "Firmware Flasher"
    },
    "defaultDonateHead": {
        "message": "Open Source / Donation Notice"
    },
    "defaultDonateText": {
        "message": "This utility is fully <strong>open source</strong> and is available free of charge to all <strong>cleanflight</strong> users.<br />If you found the cleanflight or cleanflight configurator useful, please consider <strong>supporting</strong> its development by donating."
    },
    "defaultSponsorsHead": {
        "message": "Sponsors"
    },
    "defaultDocumentationHead": {
        "message": "Documentation / Manual"
    },
    "defaultDocumentation": {
        "message": "Cleanflight documentation is available in Markdown and PDF formats.<br /><br />The PDF manual appropriate to the firmware can be downloaded from the github releases page, <a href=\"https://github.com/cleanflight/cleanflight/releases\" target=\"_blank\">here</a>.<br />The Markdown latest online documentation is available <a href=\"https://github.com/cleanflight/cleanflight/tree/master/docs\" target=\"_blank\">here</a> - you can switch to the appropriate version of the documentation by selecting the tag."
    },
    "defaultSupportHead": {
        "message": "Support"
    },
    "defaultSupport": {
        "message": "For support please search the forums first or contact your vendor.<br /><br />RC Groups thread is <a href=\"http://www.rcgroups.com/forums/showthread.php?t=2249574&page=1\" target=\"_blank\">here</a>. MultiWii forums thread is <a href=\"http://www.multiwii.com/forum/viewtopic.php?f=23&t=5149\" target=\"_blank\">here</a>.<br /><br />Developers and users hang out in IRC channel on freenode<br /><a href=\"irc://irc.freenode.net/#cleanflight\" target=\"_blank\">irc://irc.freenode.net/#cleanflight</a> or <a href=\"http://webchat.freenode.net/?channels=cleanflight\" target=\"_blank\">Join via web client</a>."
    },
    "initialSetupBackupAndRestoreApiVersion": {
        "message": "<span style=\"color: red\">Backup and restore functionality disabled.</span>  You have firmware with API version <span style=\"color: red\">$1</span>, backup and restore requires <span style=\"color: green\">$2</span>.  Please backup your settings via the CLI, see Cleanflight documentation for procedure."
    },
    "initialSetupButtonCalibrateAccel": {
        "message": "Calibrate Accelerometer"
    },
    "initialSetupCalibrateAccelText": {
        "message": "Place board or frame on <strong>leveled</strong> surface, proceed with calibration, ensure platform is not moving during calibration period"
    },
    "initialSetupButtonCalibrateMag": {
        "message": "Calibrate Magnetometer"
    },
    "initialSetupCalibrateMagText": {
        "message": "Move multirotor atleast <strong>360</strong> degrees on all axis of rotation, you have 30 seconds to perform this task"
    },
    "initialSetupButtonReset": {
        "message": "Reset Settings"
    },
    "initialSetupResetText": {
        "message": "Restore settings to <strong>default</strong>"
    },
    "initialSetupButtonBackup": {
        "message": "Backup"
    },
    "initialSetupButtonRestore": {
        "message": "Restore"
    },
    "initialSetupBackupRestoreText": {
        "message": "<strong>Backup</strong> your configuration in case of an accident, <strong>CLI</strong> settings are <span style=\"color: red\">not</span> included - See 'dump' cli command"
    },
    "initialSetupBackupSuccess": {
        "message": "Backup saved <span style=\"color: green\">successfully</span>"
    },
    "initialSetupRestoreSuccess": {
        "message": "Configuration restored <span style=\"color: green\">successfully</span>"
    },
    "initialSetupButtonResetZaxis": {
        "message": "Reset Z axis, offset: 0 deg"
    },
    "initialSetupButtonResetZaxisValue": {
        "message": "Reset Z axis, offset: $1 deg"
    },
    "initialSetupMixerHead": {
        "message": "Mixer Type"
    },
    "initialSetupThrottleHead": {
        "message": "Throttle Settings"
    },
    "initialSetupMinimum": {
        "message": "Minimum:"
    },
    "initialSetupMaximum": {
        "message": "Maximum:"
    },
    "initialSetupFailsafe": {
        "message": "Failsafe:"
    },
    "initialSetupMinCommand": {
        "message": "MinCommand:"
    },
    "initialSetupBatteryHead": {
        "message": "Battery"
    },
    "initialSetupMinCellV": {
        "message": "Min Cell Voltage:"
    },
    "initialSetupMaxCellV": {
        "message": "Max Cell Voltage:"
    },
    "initialSetupVoltageScale": {
        "message": "Voltage Scale:"
    },
    "initialSetupAccelTrimsHead": {
        "message": "Accelerometer trims"
    },
    "initialSetupPitch": {
        "message": "Pitch:"
    },
    "initialSetupRoll": {
        "message": "Roll:"
    },
    "initialSetupMagHead": {
        "message": "Magnetometer"
    },
    "initialSetupDeclination": {
        "message": "Declination:"
    },
    "initialSetupInfoHead": {
        "message": "Info"
    },
    "initialSetupBattery": {
        "message": "Battery voltage:"
    },
    "initialSetupBatteryValue": {
        "message": "$1 V"
    },
    "initialSetupDrawn": {
        "message": "Capacity drawn:"
    },
    "initialSetupDrawing": {
        "message": "Current draw:"
    },
    "initialSetupBatteryMahValue": {
        "message": "$1 mAh"
    },
    "initialSetupBatteryAValue": {
        "message": "$1 A"
    },
    "initialSetupRSSI": {
        "message": "RSSI:"
    },
    "initialSetupRSSIValue": {
        "message": "$1 %"
    },
    "initialSetupGPSHead": {
        "message": "GPS"
    },
    "initialSetupInstrumentsHead": {
        "message": "Instruments"
    },
    "initialSetupButtonSave": {
        "message": "Save"
    },
    "initialSetupModel": {
        "message": "Model: $1"
    },
    "initialSetupHeading": {
        "message": "Heading: $1 deg"
    },
    "initialSetupAccelCalibStarted": {
        "message": "Accelerometer calibration started"
    },
    "initialSetupAccelCalibEnded": {
        "message": "Accelerometer calibration finished"
    },
    "initialSetupMagCalibStarted": {
        "message": "Magnetometer calibration started"
    },
    "initialSetupMagCalibEnded": {
        "message": "Magnetometer calibration finished"
    },
    "initialSetupSettingsRestored": {
        "message": "Settings restored to <strong>default</strong>"
    },
    "initialSetupEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "configurationFeatureEnabled": {
        "message": "Enabled"
    },
    "configurationFeatureName": {
        "message": "Feature"
    },
    "configurationFeatureDescription": {
        "message": "Description"
    },


    "configurationMixer": {
        "message": "Mixer"
    },
    "configurationFeatures": {
        "message": "Other Features"
    },
    "configurationReceiver": {
        "message": "Receiver Mode"
    },
    "configurationFailsafe": {
        "message": "Receiver failsafe"
    },
    "configurationRSSI": {
        "message": "RSSI (Signal Strength)"
    },
    "configurationEscFeatures": {
        "message": "ESC/Motor Features"
    },
    "configurationFeaturesHelp": {
        "message": "<strong>Note:</strong> Not all combinations of features are valid.  When the flight controller firmware detects invalid feature combinations conflicting features will be disabled.<br /><strong>Note:</strong> Configure serial ports <span style=\"color: red\">before</span> enabling the features that will use the ports."
    },

    "configurationBoardAlignment": {
        "message": "Board Alignment"
    },
    "configurationBoardAlignmentRoll": {
        "message": "Roll Adjustment [deg]"
    },
    "configurationBoardAlignmentPitch": {
        "message": "Pitch Adjustment [deg]"
    },
    "configurationBoardAlignmentYaw": {
        "message": "Yaw Adjustment [deg]"
    },
    "configurationAccelTrims": {
        "message": "Accelerometer Trim"
    },
    "configurationAccelTrimRoll": {
        "message": "Accelerometer Roll Trim"
    },
    "configurationAccelTrimPitch": {
        "message": "Accelerometer Pitch Trim"
    },
    "configurationMagDeclination": {
        "message": "Magnetometer Declination [deg]"
    },
    "configurationAutoDisarmDelay": {
        "message": "Disarm motors after set delay(Seconds)- Only if feature MOTOR_STOP enabled"
    },
    "configurationDisarmKillSwitch": {
        "message": "Disarm motors regardless of throttle value - Only when arming and disarming via AUX channel"
    }, 
    "configurationThrottleMinimum": {
        "message": "Minimum Throttle"
    },
    "configurationThrottleMid": {
        "message": "Middle Throttle [RC inputs center value]"
    },
    "configurationThrottleMaximum": {
        "message": "Maximum Throttle"
    },
    "configurationThrottleFailsafe": {
        "message": "Failsafe Throttle"
    },
    "configurationThrottleMinimumCommand": {
        "message": "Minimum Command"
    },
    "configurationBatteryVoltage": {
        "message": "Battery Voltage"
    },
    "configurationBatteryMinimum": {
        "message": "Minimum Cell Voltage"
    },
    "configurationBatteryMaximum": {
        "message": "Maximum Cell Voltage"
    },
    "configurationBatteryWarning": {
        "message": "Warning Cell Voltage"
    },
    "configurationBatteryScale": {
        "message": "Voltage Scale"
    },
    "configurationCurrent": {
        "message": "Current Sensor"
    },
    "configurationCurrentScale": {
        "message": "Scale the output voltage to milliamps [1/10th mV/A]"
    },
    "configurationCurrentOffset": {
        "message": "Offset in millivolt steps"
    },
    "configurationBatteryMultiwiiCurrent": {
        "message": "Enable support for legacy Multiwii MSP current output"
    },
    "configurationGPS": {
        "message": "GPS"
    },
    "configurationGPSProtocol": {
        "message": "Protocol"
    },
    "configurationGPSBaudrate": {
        "message": "Baudrate"
    },
    "configurationGPSubxSbas": {
        "message": "Ground Assistance Type"
    },
    "configurationSerialRX": {
        "message": "Serial Receiver Provider"
    },
    "configurationEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },
    "configurationButtonSave": {
        "message": "Save and Reboot"
    },

    "portsHelp": {
        "message": "Configure serial ports.  <strong>Note:</strong> not all combinations are valid.  When the flight controller firmware detects this the serial port configuration will be reset."
    },
    "portsFirmwareUpgradeRequired": {
        "message": "Firmware upgrade <span style=\"color: red\">required</span>.  Serial port configurations of firmware &lt; 1.8.0 is not supported."
    },
    "portsButtonSave": {
        "message": "Save and Reboot"
    },
    "portsTelemetryDisabled": {
        "message": "Disabled"
    },
    "portsFunction_MSP": {
        "message": "MSP"
    },
    "portsFunction_GSP": {
        "message": "GSP"
    },
    "portsFunction_TELEMETRY_FRSKY": {
        "message": "FrSky"
    },
    "portsFunction_TELEMETRY_HOTT": {
        "message": "HoTT"
    },
    "portsFunction_TELEMETRY_MSP": {
        "message": "MSP"
    },
    "portsFunction_TELEMETRY_SMARTPORT": {
        "message": "SmartPort"
    },
    "portsFunction_RX_SERIAL": {
        "message": "Serial RX"
    },
    "portsFunction_BLACKBOX": {
        "message": "Blackbox"
    },

    "pidTuningUpgradeFirmwareToChangePidController": {
        "message": "<span style=\"color: red\">Changing PID controller disabled - you can change it via the CLI.</span>  You have firmware with API version <span style=\"color: red\">$1</span>, but this functionality requires requires <span style=\"color: green\">$2</span>."
    },
    "pidTuningName": {
        "message": "Name"
    },
    "pidTuningProportional": {
        "message": "Proportional"
    },
    "pidTuningIntegral": {
        "message": "Integral"
    },
    "pidTuningDerivative": {
        "message": "Derivative"
    },
    "pidTuningRollPitchRate": {
        "message": "ROLL &amp; PITCH rate"
    },
    "pidTuningRollRate": {
        "message": "ROLL rate"
    },
    "pidTuningPitchRate": {
        "message": "PITCH rate"
    },
    "pidTuningYawRate": {
        "message": "YAW rate"
    },
    "pidTuningTPA": {
        "message": "TPA"
    },
    "pidTuningTPABreakPoint": {
        "message": "TPA Breakpoint"
    },
    "pidTuningButtonSave": {
        "message": "Save"
    },
    "pidTuningButtonRefresh": {
        "message": "Refresh"
    },
    "pidTuningProfileHead": {
        "message": "Profile"
    },
    "pidTuningControllerHead": {
        "message": "PID Controller"
    },
    "pidTuningLoadedProfile": {
        "message": "Loaded Profile: <strong>$1</strong>"
    },
    "pidTuningDataRefreshed": {
        "message": "PID data <strong>refreshed</strong>"
    },
    "pidTuningEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "receiverThrottleMid": {
        "message": "Throttle MID"
    },
    "receiverThrottleExpo": {
        "message": "Throttle EXPO"
    },
    "receiverRcRate": {
        "message": "RC Rate"
    },
    "receiverRcExpo": {
        "message": "RC Expo"
    },
    "receiverChannelMap": {
        "message": "Channel Map"
    },
    "receiverChannelMapTitle": {
        "message": "You can define your own channel map by clicking inside the box"
    },
    "receiverRssiChannel": {
        "message": "RSSI Channel"
    },
    "receiverRefreshRateTitle": {
        "message": "Graph refresh rate"
    },
    "receiverButtonSave": {
        "message": "Save"
    },
    "receiverButtonRefresh": {
        "message": "Refresh"
    },
    "receiverDataRefreshed": {
        "message": "RC Tuning data <strong>refreshed</strong>"
    },
    "receiverEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "auxiliaryHelp": {
        "message": "Use ranges to define the switches on your transmitter and corresponding mode assignments.  A receiver channel that gives a reading between a range min/max will activate the mode.  Remember to save your settings using the Save button."
    },
    "auxiliaryMin": {
        "message": "Min"
    },
    "auxiliaryMax": {
        "message": "Max"
    },
    "auxiliaryAddRange": {
        "message": "Add Range"
    },
    "auxiliaryButtonSave": {
        "message": "Save"
    },
    "auxiliaryEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "adjustmentsHelp": {
        "message": "Configure adjustment switches.  See the 'in-flight adjustments' section of the manual for details.  The changes that adjustment functions make are not saved automatically.  There are 4 slots.  Each switch used to concurrently make adjustments requires exclusive use of a slot."
    },
    "adjustmentsExamples": {
        "message": "Examples"
    },
    "adjustmentsExample1": {
        "message": "Use Slot 1 and a 3POS switch on AUX1 to select between Pitch/Roll P, I and D and another 3POS switch on AUX2 to increase or decrease the value when held up or down."
    },
    "adjustmentsExample2": {
        "message": "Use Slot 2 and a 3POS switch on AUX4 to select enable Rate Profile Selection via the same 3POS switch on the same channel."
    },
    "adjustmentsColumnEnable": {
        "message": "If enabled"
    },
    "adjustmentsColumnUsingSlot": {
        "message": "using slot"
    },
    "adjustmentsColumnWhenChannel": {
        "message": "when channel"
    },
    "adjustmentsColumnIsInRange": {
        "message": "is in range"
    },
    "adjustmentsColumnThenApplyFunction": {
        "message": "then apply"
    },
    "adjustmentsColumnViaChannel": {
        "message": "via channel"
    },
    "adjustmentsSlot0": {
        "message": "Slot 1"
    },
    "adjustmentsSlot1": {
        "message": "Slot 2"
    },
    "adjustmentsSlot2": {
        "message": "Slot 3"
    },
    "adjustmentsSlot3": {
        "message": "Slot 4"
    },
    "adjustmentsMin": {
        "message": "Min"
    },
    "adjustmentsMax": {
        "message": "Max"
    },
    "adjustmentsFunction0": {
        "message": "No changes"
    },
    "adjustmentsFunction1": {
        "message": "RC Rate Adjustment"
    },
    "adjustmentsFunction2": {
        "message": "RC Expo Adjustment"
    },
    "adjustmentsFunction3": {
        "message": "Throttle Expo Adjustment"
    },
    "adjustmentsFunction4": {
        "message": "Pitch & Roll Rate Adjustment"
    },
    "adjustmentsFunction5": {
        "message": "Yaw Rate Adjustment"
    },
    "adjustmentsFunction6": {
        "message": "Pitch & Roll P Adjustment"
    },
    "adjustmentsFunction7": {
        "message": "Pitch & Roll I Adjustment"
    },
    "adjustmentsFunction8": {
        "message": "Pitch & Roll D Adjustment"
    },
    "adjustmentsFunction9": {
        "message": "Yaw P Adjustment"
    },
    "adjustmentsFunction10": {
        "message": "Yaw I Adjustment"
    },
    "adjustmentsFunction11": {
        "message": "Yaw D Adjustment"
    },
    "adjustmentsFunction12": {
        "message": "Rate Profile Selection"
    },
    "adjustmentsSave": {
        "message": "Save"
    },
    "adjustmentsEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },


    "servosModel": {
        "message": "Model:"
    },
    "servosChangeDirection": {
        "message": "Change Direction in TX To Match"
    },
    "servosGyroAccelDirection": {
        "message": "Gyroscope / Accelerometer Direction"
    },
    "servosName": {
        "message": "Name"
    },
    "servosMid": {
        "message": "MID"
    },
    "servosMin": {
        "message": "MIN"
    },
    "servosMax": {
        "message": "MAX"
    },
    "servosDirection": {
        "message": "Direction"
    },
    "servosLiveMode": {
        "message": "Enable Live mode:"
    },
    "servosButtonSave": {
        "message": "Save"
    },
    "servosModelNoSupport": {
        "message": "This model doesn't support servos"
    },
    "servosNormal": {
        "message": "Normal"
    },
    "servosReverse": {
        "message": "Reverse"
    },
    "servosEepromSave": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "gpsHead": {
        "message": "GPS"
    },
    "gps3dFix": {
        "message": "3D Fix:"
    },
    "gpsFixTrue": {
        "message": "<span style=\"color: green\">True</span>"
    },
    "gpsFixFalse": {
        "message": "<span style=\"color: red\">False</span>"
    },
    "gpsAltitude": {
        "message": "Altitude:"
    },
    "gpsLat": {
        "message": "Latitude:"
    },
    "gpsLon": {
        "message": "Longitude:"
    },
    "gpsSpeed": {
        "message": "Speed:"
    },
    "gpsSats": {
        "message": "Sats:"
    },
    "gpsDistToHome": {
        "message": "Dist to Home:"
    },
    "gpsSignalStrHead": {
        "message": "GPS Signal Strength"
    },
    "gpsSignalStr": {
        "message": "Signal Strength"
    },

    "motorsMaster": {
        "message": "Master"
    },
    "motorsNotice": {
        "message": "<strong>Motor Test Mode Notice:</strong><br />Moving the sliders will cause the motors to <strong>spin up</strong>.<br />In order to prevent injury <strong style=\"color: red\">remove ALL propellers</strong> before using this feature.<br />If you understand these instructions check the <strong>box</strong> below to <strong style=\"color: green\">enable</strong> motor test.<br /><br /><label><input type=\"checkbox\" /> Check</label>"
    },

    "sensorsInfo": {
        "message": "Keep in mind that using fast update periods and rendering multiple graphs at the same time is resource heavy and will burn your battery quicker if you use a laptop.<br />We recommend to only render graphs for sensors you are interested in while using reasonable update periods."
    },
    "sensorsRefresh": {
        "message": "Refresh:"
    },
    "sensorsScale": {
        "message": "Scale:"
    },

    "cliInfo": {
        "message": "<span style=\"color: red\">Note</span>: Leaving CLI tab or pressing Disconnect will <strong>automatically</strong> send \"<strong>exit</strong>\" to the board.  With the latest firmware this will make the controller <span style=\"color: red\">restart</span> and unsaved changes will be <span style=\"color: red\">lost</span>."
    },
    "cliInputPlaceholder": {
        "message": "Write your command here"
    },

    "loggingNote": {
        "message": "Data will be logged in this tab <span style=\"color: red\">only</span>, leaving the tab will <span style=\"color: red\">cancel</span> logging and application will return to its normal <strong>\"configurator\"</strong> state.<br /> You are free to select the global update period, data will be written into the log file every <strong>1</strong> second for performance reasons."
    },
    "loggingSamplesSaved": {
        "message": "Samples Saved:"
    },
    "loggingLogSize": {
        "message": "Log Size:"
    },
    "loggingButtonLogFile": {
        "message": "Select Log File"
    },
    "loggingStart": {
        "message": "Start Logging"
    },
    "loggingStop": {
        "message": "Stop Logging"
    },
    "loggingBack": {
        "message": "Leave Logging / Disconnect"
    },
    "loggingErrorNotConnected": {
        "message": "You need to <strong>connect</strong> first"
    },
    "loggingErrorLogFile": {
        "message": "Please select log file"
    },
    "loggingErrorOneProperty": {
        "message": "Please select at least one property to log"
    },
    "loggingAutomaticallyRetained": {
        "message": "Automatically loaded previous log file: <strong>$1</strong>"
    },

    "dataflashNote": {
        "message": "Blackbox flight logs can be recorded to your flight controller's onboard dataflash chip."
    },
    "dataflashNotSupportedNote": {
        "message": "Your flight controller does not have a compatible dataflash chip available."
    },
    "dataflashFirmwareUpgradeRequired": {
        "message": "Dataflash requires firmware &gt;= 1.8.0."
    },
    "dataflashButtonSaveFile": {
        "message": "Save flash to file..."
    },
    "dataflashButtonErase": {
        "message": "Erase flash"
    },
    "dataflashConfirmEraseTitle": {
        "message": "Confirm dataflash erase"
    },
    "dataflashConfirmEraseNote": {
        "message": "This will erase any Blackbox logs or other data contained in the dataflash which will take about 20 seconds, are you sure?"
    },
    "dataflashSavingTitle": {
        "message": "Saving dataflash to file"
    },
    "dataflashSavingNote": {
        "message": "Saving could take several minutes, please wait."
    },
    "dataflashSavingNoteAfter": {
        "message": "Save completed! Press \"Ok\" to continue."
    },
    "dataflashButtonSaveCancel": {
        "message": "Cancel"
    },
    "dataflashButtonSaveDismiss": {
        "message": "Ok"
    },
    "dataflashButtonEraseConfirm": {
        "message": "Yes, erase dataflash"
    },
    "dataflashButtonEraseCancel": {
        "message": "Cancel"
    },
    "dataflashFileWriteFailed": {
        "message": "Failed to write to the file you selected, are the permissions on that folder okay?"
    },
    "firmwareFlasherReleaseSummaryHead": {
        "message": "Release info"
    },
    "firmwareFlasherReleaseName": {
        "message": "Name/Version:"
    },
    "firmwareFlasherReleaseVersionUrl": {
        "message": "Visit release page."
    },
    "firmwareFlasherReleaseNotes": {
        "message": "Release notes:"
    },
    "firmwareFlasherReleaseDate": {
        "message": "Date:"
    },
    "firmwareFlasherReleaseStatus": {
        "message": "State:"
    },
    "firmwareFlasherReleaseTarget": {
        "message": "Target:"
    },
    "firmwareFlasherReleaseFile": {
        "message": "Binary:"
    },
    "firmwareFlasherReleaseStatusReleaseCandidate": {
        "message": "<span style=\"color: red\">IMPORTANT: This firmware release is currently marked as a release candidate.  Please report any issues immediately.</span>"
    },
    "firmwareFlasherReleaseFileUrl": {
        "message": "Download manually."
    },
    "firmwareFlasherTargetWarning": {
        "message": "<span style=\"color: red\">IMPORTANT</span>: Ensure you flash a file appropriate for your target.  Flashing a binary for the wrong target can cause <span style=\"color: red\">bad</span> things to happen."
    },

    "firmwareFlasherPath": {
        "message": "Path:"
    },
    "firmwareFlasherSize": {
        "message": "Size:"
    },
    "firmwareFlasherStatus": {
        "message": "Status:"
    },
    "firmwareFlasherProgress": {
        "message": "Progress:"
    },
    "firmwareFlasherLoadFirmwareFile": {
        "message": "Please load firmware file"
    },
    "firmwareFlasherNoReboot": {
        "message": "No reboot sequence"
    },
    "firmwareFlasherOnlineReleasesDescription": {
        "message": "Available online firmware releases - Select the correct firmware appropriate for your board."
    },
    "firmwareFlasherNoRebootDescription": {
        "message": "Enable if you are flashing board with bootloader pins shorted"
    },
    "firmwareFlasherFlashOnConnect": {
        "message": "Flash on connect"
    },
    "firmwareFlasherFlashOnConnectDescription": {
        "message": "Attempt to flash the board automatically (triggered by newly detected serial port)"
    },
    "firmwareFlasherFullChipErase": {
        "message": "Full Chip Erase"
    },
    "firmwareFlasherFullChipEraseDescription": {
        "message": "Wipes all configuration data currently stored on the board"
    },
    "firmwareFlasherFlashDevelopmentFirmware": {
        "message": "Use Development Firmware"
    },
    "firmwareFlasherFlashDevelopmentFirmwareDescription": {
        "message": "Flash most recent (untested) development firmware"
    },
    "firmwareFlasherFlashSlowly": {
        "message": "Flash slowly"
    },
    "firmwareFlasherFlashSlowlyDescription": {
        "message": "Use 115200 baudrate for flashing (useful for flashing via bluetooth)"
    },
    "firmwareFlasherOptionLabelSelectFirmware": {
        "message": "Choose a Firmware / Board"
    },
    "firmwareFlasherButtonLoadLocal": {
        "message": "Load Firmware [Local]"
    },
    "firmwareFlasherButtonLoadOnline": {
        "message": "Load Firmware [Online]"
    },
    "firmwareFlasherFlashFirmware": {
        "message": "Flash Firmware"
    },
    "firmwareFlasherGithubInfoHead": {
        "message": "Github Firmware Info"
    },
    "firmwareFlasherCommiter": {
        "message": "Committer:"
    },
    "firmwareFlasherDate": {
        "message": "Date:"
    },
    "firmwareFlasherHash": {
        "message": "Hash:"
    },
    "firmwareFlasherUrl": {
        "message": "Go to GitHub to review this commit..."
    },
    "firmwareFlasherMessage": {
        "message": "Message:"
    },
    "firmwareFlasherWarninghead": {
        "message": "Warning"
    },
    "firmwareFlasherWarningText": {
        "message": "Please do not try to flash <strong>non-cleanflight</strong> hardware with this firmware flasher (it wont work).<br />Do not <strong>disconnect</strong> the board or <strong>turn off</strong> your computer while flashing.<br /><br />Note: <strong>STM32</strong> bootloader is stored in <strong>ROM</strong>, it cannot be bricked.<br />Note: <strong>Auto-Connect</strong> is always disabled while you are inside firmware flasher.<br />Note: This can wipe your configuration including but not limited to PIDs, Auxiliary, and FEATURES. Make sure you have a backup.<br />"
    },
    "firmwareFlasherButtonLeave": {
        "message": "Leave Firmware Flasher"
    },
    "firmwareFlasherFirmwareNotLoaded": {
        "message": "Firmware not loaded"
    },
    "firmwareFlasherHexCorrupted": {
        "message": "HEX file appears to be corrupted"
    },
    "firmwareFlasherRemoteFirmwareLoaded": {
        "message": "<span style=\"color: green\">Remote Firmware loaded, ready for flashing</span>"
    },
    "firmwareFlasherFailedToLoadOnlineFirmware": {
        "message": "Failed to load remote firmware"
    },

    "ledStripHelp": {
        "message": "The flight controller can control colors and effects of individual LEDs on a strip.<br />Configure LEDs on the grid, configure wiring order then attach LEDs on your aircraft according to grid positions."
    },
    "ledStripButtonSave": {
        "message": "Save"
    },
    "ledStripEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    }
}