6d922bee2c
Add capacity settings and data
7 years ago
7de758c64e
Increase vbat resolution
7 years ago
824a0d5f8b
Add support for changing the craft name
...
Uses MSP_NAME/MSP_SET_NAME to get and set it. A new section was
added to the Configuration tab which includes an input for the name.
Also, some CSS changes to allow wider fields for string inputs.
7 years ago
4bb9c6415d
Fix analytics for the RX type and protocol
...
Left the event name as 'nrf24Protocol', since renaming the event
would make it difficult to compare data in the analytics.
7 years ago
42f332e627
Rename all references to NRF24 as protocol to SPI
...
For consistency. We now have other receivers that work over SPI
and might have more in the future.
7 years ago
587d1c5cb4
Add support for the RX changes in MSP
...
Implement a combobox selector for the receiver type, showing
just the options for the specific type (e.g. selecting serial
receiver reveals the combobox for the serial protocol).
On INAV > 1.7.3 read and write receiver type to RX_CONFIG rather
than to feature bits. Note that this will break the configurator
in builds with version = 1.7.4 before https://github.com/iNavFlight/inav/pull/1596/files
is applied.
7 years ago
a919702c6a
fixes #193
7 years ago
8d3980bfa2
Rangefinder setting is back
7 years ago
93a4dd1b84
MSP_IDENT removed from usage
8 years ago
c98e922602
callback update improvements
8 years ago
3f196a9505
MSP_STATUS removed from manual pulls
8 years ago
d1693cea2a
MSP_ANALOG loaded only in global handler
8 years ago
d1483e5e26
tab tasks unified
8 years ago
d1fcb81017
timing methods extracted to separate classes
8 years ago
08559abdd7
missing save
8 years ago
e8705b0365
configuration using save chainer
8 years ago
8d8308c29b
MSP chainer load used on configuration page
8 years ago
35baf4302b
first cut of presets
8 years ago
9db2fec934
Merge pull request #85 from iNavFlight/config-tab-improvements
...
Config tab improvements
8 years ago
a22efc480e
updated tracking events
8 years ago
b9506548ee
radio features
8 years ago
a722f89973
improved hinting
8 years ago
c6b2e40cbb
features non-radio rework
8 years ago
1b4c729e46
cleaning
8 years ago
9de6e9d2f1
fixed reboot sequence
8 years ago
6581da1654
voltage and current
8 years ago
4bd6f46710
RSSI rework
8 years ago
684d8c90d2
Updated sensor detection for AUTOdetection mode
8 years ago
b051cb5f0c
GUI for SENSOR_CONFIG
8 years ago
55293812d2
MSP layer for MSP_SENSOR_CONFIG
8 years ago
1bb6850c24
Merge remote-tracking branch 'origin/master' into osd-support
8 years ago
6766be0f93
Merge remote-tracking branch 'origin/master' into async-support
8 years ago
771be944d9
final touches for async support
8 years ago
2946004ccf
Add support for MSP_SENSOR_STATUS if firmware version is gte 1.5
8 years ago
026edebe88
other frequencies
8 years ago
dace7d27d8
GUI for async gyro mode
8 years ago
b68f9a15c4
various code improvements
8 years ago
18a00dedf8
MSP refactoring
8 years ago
39eadf3efe
final fixes
8 years ago
58da169cdf
Simplified UI for looptime selection in async_mode=NONE
8 years ago
ead5f02022
gyro_lpf and gyro sync setable in async_mode=NONE
8 years ago
f19f668a6e
Log entry for disabled PWM output
8 years ago
6e429d918c
Merge pull request #56 from iNavFlight/pwm-output-enable
...
Feature PWM_OUTPUT_ENABLE
8 years ago
4ea549ddf8
version bump
8 years ago
d67bb1a0d0
servo refresh rate
8 years ago
e908018dea
virtual entry added to motor rate select when rate not found on list
8 years ago
b69ec9a385
first draft of feature PWM_OUTPUT_ENABLE
8 years ago
8761ec844e
defaults changed
8 years ago
cf4f12badf
brushed default rate updated
8 years ago
ec98fc5d80
UI for selecting motor protocol and rate
8 years ago
540d90a45a
MSP commands for ADVANCED_CONFIG
8 years ago
7d6a8be4f4
support for PCA9685
8 years ago
7cc54325ac
looptime tracking
8 years ago
feda2250fa
configuration tracking
8 years ago
becea11862
tracking for GPS
8 years ago
43118c9fa1
Fix SerialRX provider issue. Closes #36
8 years ago
d830b3d05b
Fixed to be up to date with latest changes in iNav
8 years ago
42cd6f00a9
Fixed NRF24 and SOFTSPI feature bits to match iNav
8 years ago
a7b36338e1
Set nrf24rx_id to zero when nrf24 protocol changes
8 years ago
9f49d59f5f
Added NRF24 setting to configuration tab
8 years ago
61ebb7a455
Switched auto and disabled options for SBAS
9 years ago
e6a86a9fec
Calibration tab (empty); Add possibility to disable GPS ground assistance
9 years ago
4e2f65eca6
Various fixes. Flow sensor icon
9 years ago
85457b98be
Remove ACC_TRIM read command. Improve GPS fix handling
9 years ago
4e8d94304e
Remove accel trims. Rearrange layout
...
Signed-off-by: Konstantin Sharlaimov (DigitalEntity) <konstantin.sharlaimov@gmail.com>
9 years ago
65ba4e586f
More resolution for board alignment
...
Signed-off-by: Konstantin Sharlaimov (DigitalEntity) <konstantin.sharlaimov@gmail.com>
9 years ago
81a49d48b2
changes to support MSP API 1.17 (removal of 3d deadband configuration
...
via MSP_3D/MSP_SET_3D)
At somepoint we can add the support for the updated
MSP_DEADBAND/MSP_SET_DEADBAND commands.
9 years ago
ebd77db93f
Merge pull request #323 from dan557/development
...
Add Current and Voltage readout on configuration tab
9 years ago
2044fe879c
Fix for https://github.com/cleanflight/cleanflight/issues/1551
9 years ago
1a58bfcf82
Add Race Transponder configuration support.
...
Also cleans up i18n support for 'features' and adds tooltip support for
them on the configuration tab.
9 years ago
94535289ca
update gui.interval with new renamed function
9 years ago
cf2574a62c
rename function to a more suitable name
9 years ago
2d4964f9a2
Update Current and voltage readouts every 250ms
9 years ago
0d3fbbddac
Fix for https://github.com/cleanflight/cleanflight/issues/1551
9 years ago
7b5d074747
Adding support for enabling/disabling transponder feature.
9 years ago
14135cb64e
Cleanup board/sensor alignment UI.
9 years ago
3318ad1555
Merge branch 'cleanflight/development' into NewPIDFunctions
9 years ago
31fa4bfaa2
Change VCP reconnect delay to 2.5 seconds. 2 seconds was not long
...
enough.
9 years ago
0fa241b462
Fixed JS bug where variable for sensor alginment gets undefined and improved backwards compatibility
9 years ago
af2089e38c
fix API version check when loading 3D settings on configuration tab.
9 years ago
d214b30d2e
Correcting Labels
9 years ago
6799fca20b
Merge branch 'cleanflight/development' into NewPIDFunctions
...
# Conflicts:
# tabs/configuration.html
# tabs/receiver.css
9 years ago
587a1025d9
Add anonymous tracking of used features and serial rx provider so we can
...
better understand what features to focus on.
9 years ago
c1a7452b27
Merge remote-tracking branch 'upstream/NewPIDFunctions' into NewPIDFunctions
...
Conflicts:
js/backup_restore.js
js/data_storage.js
js/msp.js
9 years ago
e7ef71c244
Add Serial RX IBUS Support.
9 years ago
067999c5e8
added MSP support for sensor orientation, some fixes for 3D backup and restore
9 years ago
c498e7de34
Added support for failsafe TAB
...
Made in cooperation with skaman82.
Summary of modifications:
- Extended data storage to hold data for new/changed MSP messages.
- Added support for added/changed MSP messages.
- Added assigned mode(s) to AUX labels.
- Tooltip changes.
- Included style modifications to configuration tab from Skaman82.
- Moved all texts from failsafe tab .html to `messages.json`.
- Removed failsafe settings from configuration tab (now obsolete).
- Added failsafe-tab variables to Backup & Restore.
- Reorganized stage 2 elements, cleanup and corrections.
9 years ago
ec57aa9d1a
Fix 3D support.
...
Add missing backup and restore functionalty
Add missing configuration migration logic
Add missing visibility toggling of 3D section when API version <
`1.14.0`
Add missing logic for issuing the correct sequence of MSP commands
issues when API version < `1.14.0` when viewing the configuration tab.
9 years ago
e801cd260a
Merge branch 'master' of https://github.com/NightHawk32/cleanflight-configurator into NightHawk32-master
9 years ago
904a55c930
Adding fixes for 3D to the newest version
...
Merge remote-tracking branch 'upstream/master'
Conflicts:
tabs/configuration.html
9 years ago
0880343488
Merge remote-tracking branch 'cleanflight/development' into GUI-rework
...
# Conflicts:
# main.js
# tabs/landing.js
9 years ago
31cd2de3d3
Added 3D configuration parameters so they don't have to be changed in the CLI
9 years ago
d73196ea11
Fix toggle buttons reverting to checkboxes after reboot.
...
This moves GUI specific code out of main and the individual tab js files
into gui.js, where it fits better.
9 years ago
e429cf623d
placing tooltip content into the json file
9 years ago
52fd9642bd
Fixed failed merge of VCP reboot handling.
9 years ago
8324a2c002
Fix repeated documentation link generation. Fixed repeated switchery
...
checkbox code.
9 years ago
1816979cc4
More Work done:
...
• Tooltip integration
• Sensor Tab: rework
• Help & Documentation Tab: basic styling
• Logging Tab: basic styling
• PID Tab: some fixes
• Added the word „configurator (+ version)“ under the logo
• Removed not yet used „help icons“
9 years ago
8e79a250ed
Basic rework of: Adjustments and PID tabs, little fixes and changes here and there
9 years ago
77effe1963
Fixing some things in the configurator tab
...
and some media-query updates
9 years ago
716457b0ed
Merge branch 'development'
9 years ago
Michel Pastor
Alberto García Hierro
Pawel Spychalski (DzikuVx)
Konstantin Sharlaimov
Pawel Spychalski (DzikuVx)
Martin Budden
Dominic Clifton
dan557
skaman82
NightHawk32
skaman82